Yes, if you can prep your floors correctly for the type of floor you will lay, then this is possible with some tools such as a tape measure, a mallet, and cutters.

Hybrid/SPC is a floating floor, comes with underlay and easy to install with a click system.

Laminates and Engineered floors with a 5G lock system, installed as floating floors with an easy click system and our 3 mm underlay for sound and moisture.

Engineered and solid timber floors, it is glue and nail floor installation, and it is good to consult a professional installer.

• Remember to keep about 10mm gap for expansion.

Do not install cabinets or kitchen island on your floating floors.

Yes, it is waterproof.

Installation is subcontracted to professional installers, and we are happy to share their contact details when purchasing our products.

Solid Timber Flooring: It is advised to acclimate the products (outside of the box) for approximately two weeks at the location where it is going to be installed.

Engineered Flooring: it is advised to acclimate at least 48 hours or until they reach their acceptable moisture content.

Hybrid / SPC: Always store the boxes on a flat and level surface; never store the boxes on their sides. Heating and air conditioning should be operational and

set between 65°F – 85°F (18.3 °C – 29.4 °C) for 48 hours prior, during and after installation.

Laminate: it is advised to acclimate at least 48 hours.